Storage:Store at RT,2 years
Product introduction
For the culture of woody plant tissues.
Preparation method
Weigh 0.565g of this product in 1L distilled water or deionized water, dissolve it with heat, add one modified WPM medium additive, mix, subpack, autoclave at 115℃ for 30 minutes, use sterile NaOH or dilute HCl solution adjusted to the required pH if necessary, and set aside.
Composition: g/L
5 water copper sulfate 0.25mg
Ferric Sodium EDTA:73.4mg
Boric acid:6.2mg
Manganese sulfate:22.3mg
2 Sodium molybdate:0.25mg
7 Water zinc sulfate:8.6mg
Potassium dihydrogen phosphate:170mg
Magnesium sulfate:180.54mg
Glycine:2mg
VB1:0.1 mg
Inositol:100mg
Nicotinic acid:0.5mg
VB6:0.5 mg
Precautions
This product may contain a small amount of inorganic salt precipitate.
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.