English
中文
Mei Medium
Storage:RT，keep dry，3 years
Product introduction
for detection and counting of Enterococci in water by one step filtration method.
preparation method
Weigh 72.0g of this product, dissolve in 1000ml distilled water by heating, divide into triangle bottles, 200ml per bottle, autoclast sterilization at 121℃ for 15 minutes, when cold to about 50℃, add 1ml 4.8% nalydixic acid solution (add a few drops of 0.1NNaOH solution to dissolve) and 1ml 0.4%TTC solution to each bottle, mix, pour into no Bacteria plate, set aside.
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark：
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note：
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
